Menu
play vidio

EOS-ENVIRO Multi-Rail Hook Lift Series MRS

EOS-ENVIRO Multi-Rail Hook Lift Series MRS

EOS-ENVIRO/England EOS Im- & Export LTD.

971 views

Uploaded on 4 years ago

EOS-ENVIRO Multi-Rail Hook Lifts for DINO & Standard Bins - Series MRS
Articulated/Sliding/Double Extendible (Telescopic) Versions
Front & Rear Lockings
Range: From 5 tons up to 40 tons lifting capacity
Suitable for 2 axles/3 axles/4 axles & 5 axles Truck Chassis

The Multi-Rail Range (MRS-Series) has been recently developed in cooperation with our Australian Distributor E.P.E. Pte Ltd. in St Marys/NSW and is based on the long- standing, proven design of Articulated (SCK-Series), Sliding (SC- Series) and Double Extendible/Telescopic (KT-Series) EOS-ENVIRO Hook Lifts, which are produced since almost 40 years by our contractual manufacturers in Italy.

Multi-Rails are the ultimate & economic solution for your operations, if you have to handle and transport alternately DINO and Standard Bins. Due to the altered rear roller bearings and rear lockings, Multi- Rail Hook Lifts demonstrate
successfully the capability of being one unit for two different
subframe widths: 660 mm (DINO Bins) & 1,060 mm (Standard)!

The robust and sturdy Multi-Rail Range comes with lifting capacities of 5 tons up to 40 tons with Rear Lockings, which are protected by guide plates against damages caused by the rails, and with hydraulically operated Rear Roll Stabilizer, which avoids an accidental overbalance during lifting and tipping, as standard version.

Easily to be fitted onto your truck chassis by our contractual workshop near Sydney/NSW or supplied for self- assembling at your yard, the Multi-Rail Hook Lift is available as a fully fabricated module in a lot of various dimensions, which suit to all commonly used truck chassis in Australia with 2 up to 5 axles.

Of course, we can also fulfill your special requirements concerning a custom-made resource, which profits to your company !
EOS-ENVIRO Hook Lift Module SCK 206 L/MRS

Technical Specification:

For Hook Lift Bins with 660 mm and 1.060 mm rail distance
Overall Length of Subframe: 6,592 mm
Hydraulic Rear Lockings for 660 mm & 1.060 mm rails
Overall Width of Module: 1,176 mm
Height of Hook Post: 1,430 mm
Height of Frame: 365 mm
Max. Lifting Capacity: 20 tons
Min. Truck GVW: 26 tons
Tare Weight: 2,970 kg
Tipping Angle: 48 degrees
Hydraulic Pump Flow: 75 l/min. required
140 ltrs. Hydraulic Oil Tank
Vertically descending rear roll stabilizer
Max. Working Pressure: 340 bar
Side flow control main valve distributor
Interlock on rear external hydraulic locking
Length of Container/Bin: Min. 5,500 mm/Max. 7,300 mm
Equipped with 2 x 2 rear rollers (660 mm & 1,070 mm width)/lubrication nipples
Control by hand push-button (Command keyboard)
Operating & Maintenance Manual
CE-Certificate


Design acc. to ADR's/3rd Version !

Remarks:

Articulated, Sliding or Double Extendible Hook Lift Arm
Multi-Rail-System (with DINO-Bins compatible !)
Additional Front Lockings (Hydraulically operated) !
Available also in other dimensions & with different lifting capacities on request