Product Description

Worktop

1. Chemical-laminating Worktop: 0.9mm thickness for the surface of chemical-laminating worktop resistant to acid and alkalis; 25mm thickness particle board for bottom of worktop; 2mm thickness with PVC sealing edge and waterproof treatment; total thickness of worktop is 26mm; it passed the chemical & physical test, for details please refer to the test report.

Steel Structure

1.

Side Frame: 60mm*40mm*2.8mm steel tube made, with EPOXY coating.

2.

3. Connecting Brace: 2mm thickness zinced steel plate

4. 90 C Stator: 2mm thickness steel plate, with EPOXY coating

5. Pipe Sleeve: PVC one-off made

6. Leveler: M10 mm screw (galvanized treatment) and waterproof nylon hexangular ringer.

* Steel Tube meets the CNS2111 G2013-85 tensile test and flexural test, for details please refer to the test report.

* Plastic-coated treatment meets the CNS H2079-1983 test for film thickness of coating, for details please refer to the test report.

Steel Bottom Cabinet

1. Cabinet Body (top board, bottom board, back board): 1.0mm thickness cold-rolled steel plate, with EPOXY coating.

2. Side Boar: 1.0mm thickness cold-rolled steel plate with EPOXY coating.

3. Door and Front Board of Drawer: two-layer 1.0mm thickness zinced steel plate, with EPOXY coating.

Hardware Accessories

1. Handle: Strip Shape

2. Hinge: Steel hinge.

3. Shelf hood: 1.2mm thickness zinced steel plate

4. Runner: triple-section ball runner.

5. Cabinet Stator: 2mm thickness zinced steel plate

6. Cabinet Base Piece: 2mm thickness cold-rolled steel plate, with EPOXY coating.

Water Supply Device

1. Laboratory professional water flow faucet with three ways (VK3): Copper material, laboratory professional vertical water flow faucet with three ways, the surface with EPOXY coating as resistant to acid-alkalis and rust; one way of this faucets can turn 360 C, switch valve material is delicate ceramic so as to avoid corrosion and damage; the outlet produced in PVC, with detachable hose nozzle, release pressure.

※ Faucet can bear a hydraulic pressure of 18kgf/cm2 (250psi), for details please refer to the test report.

※ Faucet coating piece meets the standard of adhesive power test, for details please refer to the test report.

※ Ceramic Valve passed the Abrasion-resistance Rotation Test at least 600,000 times.

2. Sink: PP material

3. Cup Sink: PP material

Power Supply Device

1. Trunking:

a. 1.0mm thickness cold-rolled steel plate, with EPOXY coating.

b. PVC material, one-off mold made.

2. Socket: 220V single-phase earthed socket.

Steel and Wood laboratory bench

Related to this item