Plastic pyrolysis plant

The recycling of waste plastics has increasingly become an important part of environmental protection. DoingGroup has developed a waste plastic pyrolysis plant in addition to plastic waste. The device can also handle waste solid waste organic waste such as waste tires / waste rubber / waste acrylic / garbage / medical waste / oil shale, the operation of the device is as follows:

Plastic pyrolysis plant working process

1. The waste plastics and other organic solid waste by the conveyor belt to the bunker by the automatic feeding system to the cracking furnace, rotating the main furnace can control the positive and negative reversing switch control switch to adjust the organic raw materials in the main furnace of the material distribution, the total amount of material control in the total volume below two thirds, close the feed sealing door, and then open the heating system.

2. When the temperature reaches about 150 ℃, gas will be generated (most of the gas is the exhaust gas at this time). When the temperature reaches about 220 ℃, oil and gas will start to enter the multi-function separator. After the multi-function separator, there will be some oil separation down, the pipeline into the residual tank, the pump into the cracking furnace to continue heating cracking.

3. Oil and gas into the cooling system through the multi-function separator, the condensed oil and water flows into the oil-water separator through the pipe for oil-water separation measurement. Under the action of negative pressure, the non-condensable gas enters the micro-vacuum system through the cooling system piping and is filtered again.

4. The pyrolyzed flue gas enters the powerful atomization dedusting tower through the flue pipe to spray dust and cool down, and is discharged into the industrial exhaust gas purifier by the induced draft fan, finally reaching innocuous discharge.

This waste plastic pyrolysis plant proved to be successful due to some advantages of it:

1. Standard pressure vessel, Q245R standard boiler plate steel, the thickness of 16mm.

2. Seamless welding process, not easy to crack, long service life.

3.360 degree omnidirectional insulation cover, thermal insulation effect is more prominent.

4. A negative pressure, water seal device to ensure safe and efficient operation of equipment. And negative pressure equipment can increase the oil rate.

5. Environment friendly, energy efficient. Our equipment has a special dust deodorant device that can achieve the waste liquid waste disposal, will not cause any harm to the environment.

The wide range of uses of the plastic pyrolysis plant final product:

Fuel oil application

1. Fuel oil can be used in steel mills, boiler heating, heavy oil power plants and cement plants to produce refined diesel for further processing and for diesel generators, light fuels, heavy machinery.

Carbon black application

2. Carbon black can be used for pressure ball burning, refined toner. Refined toner which can be used for new tires, rubber soles, pigment manufacturing.

3. Steel wire is mainly used for scrap recycling and re-cast into other steel products.

4. Combustible gas will be reused mainly for heating the reactor through recycling.

In order to meet the different needs of our customers, our processing capacity of waste plastic pyrolysis plant ranges from 3 to 12 tons, which is based on the customers' specific usage and fund budget of the equipment. If you are interested in the machine, we can customize according to your needs.

Contact: Ms Bonnie
Phone: +86-371-5677 1821
Mobile/Wechat/Whatsapp:0086-135-2669-2320
Skype: bonniezhao2
http://www.wastetireoil.com
http://www.china-doing.com

Plastic recycal pyrolysis plant for oil

Related to this item