Product Description

Molybdenum is a silvery-white, hard, transition metal, which has the eighth-highest melting point of any element. Molybdenum burns only at temperatures above 600 °C (1,112 °F). It has the lowest heating expansion of any commercially used metal and it is widely used in alloys, electrodes and catalysts.

1. Molybdenum plate, sheet, foil, strip, ribbon

Standards: ASTM B386

Size Available: Thick 0.02mm min * wide 1000mm max * Long 3000mm max

2. Molybdenum round rod, molybdenum rectangular bar

Standards: ASTM B387

Size Available: Outer Diameter 3mm ~ 350mm * Long 6000mm max

3. Molybdenum wire

Standards: ASTM B387

Size available: Outer Diameter 0.01mm min ~5mm

4. Molybdenum tube, pipe

Size available: wall thick 0.15~30mm * OD 3 ~400mm * Long 6000mm max

5. Featured Molybdenum alloys

Mo-Cu alloy (Molybdenum copper alloy)

Mo-W (Molybdenum Tungsten alloy, W-Mo alloy)

Mo-30%W

Mo-45%W

Mo-La (Molybdenum Lanthanum alloy, Mo-La alloy)

TZM alloy (High Temperature Alloy, Mo99-Ti0.5-Zr0.08-C0.02)

TZM offers twice the strength of pure molybdenum at temperatures over 1300'C. The recrystallization temperature of TZM is approximately 250'C higher than molybdenum and it offers better weldability adequate ductility. The material is manufactured either by P/M or arc-cast processes. TZM is well suited to hot work applications because of its combination of high hot hardness, high thermal conductivity, and low thermal expansion to hot work steels.

TZC alloy (Mo-Ti1.2-Zr0.3-C0.25)

Mo-Re (Molybdenum Rhenium alloy)

Mo-5%Re, Mo-41%Re, Mo-47%Re, Mo-50%Re

6. Typical sputtering target

Molybdenum target

Molybdenum plate sheet foil strip rod wire tube target

Related to this item