Remote Code Controller UPC-100

This unit can display and set the conditions of UDI-500 power supply like weld time,current and other various items.

Display is available to choose in Chinese of English.

Weld examples: Car motor,motor for mobile phone,relay contacts,various sensors,twisting wires,carbon brush,automobile switch,filament and fuse terminals.

Input voltage range (3 phase) Power Source(+10% ~15% 50/60 Hz)	AC 200V	AC 220V	AC 380V	AC 440V
Output Voltage	300V	325V	510V	600V
Output Frequency	1.25KHz/1KHz/0.8KHz/0.6KHz
Control Systems	Primary Constant Current(PEAK)		Secondary Constant Voltage
	Primary Constant Current(RMS)		Secondary Constant Power
	Secondary Constant Current(RMS)		Constant phase control
Time Setting	a.SQD:0000~9999 ms b.SQZ:0000~9999 ms c.UP1:000~400 ms d.WT1:000~600 ms e.COOL:000~999 ms f.WT2:000~600 ms g.DOW2:000~400 ms h.HOLD:000~999 ms i.OFF:0000~9999 ms
Output- parameter Setting	Current		0.01~20.0KA
	Voltage		0.1~9.99V
	Power		0.2~20.0KW
	Phase width		10%~99.9%
	Primary Current		000~220A
Duty Cycle	Output 220A(8%) Output 150A(14%) Output 100A(25%) Output 42A (100%)
Monitor Setting	Current		00.0~20.0KA (0.1unit)
	Power		00.0~20.0KW
	Voltage		0.00~9.99V
	Phase Width		10 ~100%
Transformer Turn Ratio	1.0—199.9
Dimension(mm)	491206306
Weight(kg)	20.5
Attached Equipment	DC Inverter Transformer(UT-IV10) Remote Code Controller(UPC-100)

It will be implementedwithout prior notice when the parts oftheappearanceandperformancehave technical improvements.

Highefficiency and save energy, highpower factorand small idler loss,which canachieve a stable welding.

Six control modes

[Primary Constant Current(PEAK)] [Primary Constant Current(RMS)]

[Secondary Constant Current] [Secondary Constant Voltage]

[Secondary Constant Power] [Constant phase control]

A variety of output signals make it easy to carry automation equipment.

Frequency switching function

Interrupt function

Input the electrodedisplacement canstop electricity, realizing a stable fusing welding.

Slow up and slow down functionality can make more flexible to control the welding current

With a variety of protection and alarm functions for over current,no current,no voltage and

over temperature to ensure high safe operations

The Precheckfunction determines resistance prior to the weld

Fast feedback for the best welding control

DC inverter power supply UDI-500

Related to this item