Product Description

I. Product overview

The CFT-960 addressable manual call point (manual call point for short) is mainly designed to be used with an intelligent two-bus control panel. If it is pressed after a fire is manually confirmed, an alarm signal may be sent to a fire alarm control panel which will, after receiving the alarm signal, display the coded address and the equipment status of the manual call point. When the manual call point is operating normally, the red indicator will blink; when there is a fire alarm, it will remain lit. The manual call point supports electronic coding and has a built-in fire telephone jack and a PHONE indicator, making its engineering application convenient.

Product Feature

II. Product features

It can realize complete electronic coding and in situ rewriting with help of a coder.

Designed with an upper cover and a lower cover, it can be installed, debugged and maintained conveniently.

It is designed with a two-wire fire telephone jack and is therefore more applicable to engineering application.

Designed with passive output contacts, it can control other external equipment directly through an intermediate relay.

The pressing sheet on the manual call point will not get crushed after it is pressed, but can be reset by a special tool, so it can be used repeatedly.

Product Specification / Models

4. Usage of the manual call point:

Alarm: After a fire alarm is manually confirmed, press the pressing sheet on the panel of the manual call point (see Fig.5). After that, a manual fire alarm will be given and the terminals 3 and 4 of the normally open contact will be closed (see Fig.4) at the same time. After the manual fire alarm is given, the ALARM indicator will remain lit.

Application / Models

Reset: Open the small movable panel on the panel of the manual call point (see Fig.5) and then press the RESET key gently with a special tool to restore the pressing sheet that has been pressed to its original status. Reset the fire alarm control panel and restore the manual call point to the normal monitoring status.

Addressable Manual Call Point

Related to this item