Menu

Mould Design & Processing Services

COOLING ANALYSIS

COOLING ANALYSIS

Cooling Analysis is used to evaluate and optimise cooling line design. Analysing the cooling phase can help determine the coolant conditions needed to maximise the efficiency of the proposed cooling layout. A Cooling Analysis can assist in: Cycle...
India
Main Item Moldflow
Business Type Service
FIBER ORIENTATION ANALYSIS

FIBER ORIENTATION ANALYSIS

Fiber Orientation Analysis shows a layered nature, and are affected by the filling speed, the processing conditions, and material behavior, plus the fiber aspect ratio and concentration
India
Main Item Moldflow
Business Type Service
Warpage Analysis

Warpage Analysis

Warp Analysis is used to diagnose the cause of warping and recommend a solution, such as gate location changes, design parameter changes, or reduction of wall thickness variations. This can be used to evaluate the final part shape before machining...
India
Main Item Moldflow
Business Type Service
PACKING ANALYSIS

PACKING ANALYSIS

Packing Analysis can be used to optimize the second stage of the injection molding process to achieve the right balance between part quality, part cost, and cycle time. One can set up and evaluate packing profiles to determine the optimal packing...
India
Main Item Moldflow
Business Type Service
FILL ANALYSIS

FILL ANALYSIS

Predict and visualize the flow front progression to see how the mold fills. Determine injection pressure and clamp force requirements. Optimize part wall thickness to achieve uniform filling, minimize cycle time, and reduce part cost. Predict weld...
India
Main Item Moldflow
Business Type Service
RUNNER BALANCE ANALYSIS AND OPTIMISATION

RUNNER BALANCE ANALYSIS AND OPTIMISATION

The Runner System should be designed in such a way that all of the parts finish filling at the same time. This can be achieved by balancing the runner system. Before the design of runners for a family mold, analyze each part on its own. Once we...
India
Main Item Moldflow
Business Type Service
GATE LOCATION

GATE LOCATION

The Gate Location Analysis is used to recommend injection locations for the part. This analysis works for all analysis technologies and is used as a preliminary input for a full analysis. The areas recommended for the injection location are the...
India
Main Item Moldflow
Business Type Service
MESHING SERVICES

MESHING SERVICES

Fusion Mesh, Mid-Plane Mesh and 3D Tetrahedral Mesh We have extensive experience with all Moldflow Mesh types and able to supply other Moldflow users with a high-quality accurate mesh ready to run. We convert the most complex CAD geometries into...
India
Main Item Moldflow
Business Type Service