4R Hand Valve 2 Position 5 Way Drawing Hand Valve Solenoid Pull Valve
Specification of 4R Series Hand Draw Valves: Model 4R210-06 4R210-08 4R310-08 4R310-10 Fluid Medium 40 Micron Filtered Air Position and Way Number Two-Position Five Way Two-Position Five Way Working Pressure 0--0.8Mpa(0--114psi) Working Temperature...
150lb 300lb 600lb 900lb 1500lb 2500lb 3Inch Globe Valve
BS 1873 Globe Valve The globe valves are primarily used to modulate or regulate the volume of the flow.A globe valve is not recommended when a continuous full flow of fluid is required due to the high pressure drop inherent to the design of a globe...
Globe Valve, Casting Steel Globe Valves, API/DIN/JIS/GOST Valve
Valve: Materials: Casting Steel Forged Steel Stainless Steel Exotic materials available upon request Trim Materials Stainless Steel Brass Bronze Exotic materials available upon request Spec Type API ANSI ASTM JIS Size range 1/2 "- 32" 15mm - 800mm...
High Temperature Forged Steel Valve
1) Size: NPS 1/2"-48" 2) Pressure: Class 150 - 2, 500 3) Materials: A) 1/2" - 2": A105, LF2, F11, F22, F5, F304, F316, F304L, F316L B) 2" - 48": WCB, LCB, LC3, WC6, WC9, C12, C5, CF8, CF3, CF3M, CF8M, CF8C 4) Design and manufacture standards:...
lug knife gate valve
YIMOU VALVES 1. Nominal Pressure:0.6MPa,1.0MPa 2. Nominal Diameter:D50 ~ DN600 (2" ~ 24") 3. Flange Drilled:150lb,JIS 10K,TABLE D etc. 4. Body Materials: ductile iron, carbon steel, stainless steel
LPG intelligent quick on valves
1. The intelligent Angle valve has been embedded microcomputer identify & control RFID chip on valve body; 2. Each one of valve has SOLE identification number, that is same as issue ID card to each one of cylinders; 3. Gas company can...
Full lining Angle Type Globe Valve
Full lining Angle Type Globe Valve Specifications: 1)Material:WCB Lined PTFE 2)Size rating:NPS 1"~8" 3)Working Pressure:Class 150 Lb, JIS 10K 4)DESIGN Standard:GB 12233 5)FACE TO FACE Standard:ASME 16.10,GB 12221 6) Flange End:ANSI B16.5a, JB78/79...
cast iron angle valve 10K JIS F7308/F7376
Material Table of steam stop valve The products are used for controlling the medium to open and close, preventing in fuel oil piping, lubricating oil piping and water piping a JIS-marine-cast iron angle valve JIS-marine-cast iron screw down check...
hydraulic stainless steel carbon steel ss 316 304 hose fittings
Hydraulic stainless steel carbon steel ss 316 hose fittings General Introduction: 1.Prime,High Quality 2.Standards:NPT,BSP,ISO,DIN 3.Material:ss304,316,316L 4.Certificates:ISO9001:2008, CE 5.Brand Name: ROKE 6.Place of Origin: JiangSu, China...
hander wafer butterfly valve
butterfly valve Standard or Nonstandard: Standard Material: Casting Media: Water Grooved Seat Butterfly Valve Size: DN50-DN600 End Flange: ANSI B 16.1 EN1092 AS2129 Face to Face: ANSI B 16.10, API609, BS 3N 588, DIN3202. Top Flange: ISO 5211 Normal...
Cast steel flanged globe valve
Cast globe valve 1. Design & Manufacture: ANSI B16.34, BS 1873 2. OS&Y Construction, Bolted Bonnet 3. Size Range of Globe Valve: 2" to 18" 4. Pressure Ratings: ANSI 150, 300, 600, 900, 1500 5. End Connections: Flanged, Butt weld 6. Materials...
Manual Operated Control Valve Hand Switching Valve Pneumatic Control Valves
1.All size can customer-made. 2.Spare parts can supply 3.Certification: ISO9001 4.Competitive price 5.Port size:G1/4",G3/8",G1/2"
Date: Nov 13, 2017
Brass Manual Valves
Brass Manual Valves 1.aluminum handle chromed 2.brass body chromed and polished, brass ball. 3.ISO9001 Certificate. Certificate: ISO9001 CE GOST-Russia (in process) Buyer can Apply for some country's Certificate with the factory audit in our...
Y type strainers
Flanged end Y type strainer Y type strainer is an essential device for the pipeline system. It is usually fixed on the inlet of reducing valve, relief valve and lever control valve to clear away the impurity in the media, ensuring normal use....
Beijing Valve General Factory Co., Ltd
Beijing Valve General Factory Co., Ltd is founded in 1952,is the key enterprise of National Mechanical Department,is the top 500 enterprises of China machinery,Specialized in manufacturing a wide range of valves in industry,such as ball...
Honban Valve Co.,LTD
HONBAN valve is an industrial valve manufacturer engaged in designing and producing ball, gate, globe, check, butterfly valve, strainers etc. from the begging of being a factory in 1998 producing GB and DIN standard valve, after several years of ...
Qingdao Bestflow Industrial CO.,LTD
BESTFLOW company is one of the professional manufacturers and exporters of pipeline fittings and valves in China. The products include: steel fittings, steel flanges, steel nipples & couplings, iron fittings, valves, OEM service casting and forging ...
QT Fluid(Shanghai)Tech Co.,Ltd
QT Fluid(Shanghai)Tech Co.,Ltd.Our factory is located at Jiading District,in the west of Shanghai.We are specialized in the designing,R&D,manufacturing and saling of directional control valves. For further info,please contact qtfluid at yahoo dot com
Rader Auto Diesel Parts CO.,LTD
Rader Auto Diesel Parts CO.,LTD focus on the business of diesel parts,such as Head Rotor,Diesel Nozzle,Diesel Plunger,Deliver Valves,Pencil Diesel Nozzles,VE Pump Parts,Repair Kit,Turbo diesel system,C System,Nozzle tester,Test bench,Standard Oil injector