C Purlin Roll Forming Machine
Dec 04, 2009
Main characteristics:
1) Simple structure, good looking. By using H-shape steel structure, the whole machine line is stable.
2) Rollers are manufactured from GCr 15, quenching treated, hardness HRC58-62.
3) Shafts are.....
China
Sell U Joint
Dec 25, 2009
1.Consist of Cross shaft, four needle roller bearings, seals and fixed rings
2. Cross shaft involves forging mould, case harden and CNC processing
3. Needle roller bearings are full needle roller bearings, which have high load.....
China
Drawworks Check Valve Oilfield, Drilling, Rig
Dec 25, 2009
Design features: • All shaft supports are roller bearings. Materials for the shafts are alloy steel. • Forced lubrication is used for all chains. • Grooved drum: there are ventilating air tube clutches at the high/ low speed end of.....
China
Flexible Duct Connector Machine
Dec 25, 2009
flexible duct connector machine Main technical data: product size according to customers working speed 4-6m/ min Roller stations single side 12 groups, total 24 groups Roller Material cr12 steel , quench HRC58-62, chromeplate Shaft material 45# steel.....
China
Roller Commercial Doors
Dec 25, 2009
Non-Insulated Aluminum Roller Doors
Slat: 77AH Series
Material: 1.0 mm Aluminum alloy, double layer Non-insulated
Guide: Aluminum
Bottom panel: Aluminum, with seal
Shaft: Round tube diameter 114mm
Max available width: 5000mm
Max.....
China
Sell Cylindrical Roller Bearing
Dec 25, 2009
This type of bearings is separable.As their rollers linearly come into contact withinner ring and outer ring with less coefficient of friction.These bearings have very good capacity of radial load, suitable for eletric motors, transmission shafts and.....
China
Cylindrical Roller Bearing
Dec 25, 2009
suitable for electric motors, automobiles, transmission shafts, gear shafts and so on.
Bearing No: NU204---NU220 NU304---NU320 NU405---NU419
NU2204---NU2220 NU2304---NU2320
NJ204---NJ220 .....
China
Sell Spherical Roller Bearings
Dec 25, 2009
Spherical roller bearings are self-aligning, double-row, combination radial and thrust bearings. They use a spherical or crowned roller as the rolling element. The outer ring contains a spherical race which allows for some misalignment of the shaft.....
China
Spare Parts
Dec 24, 2009
We are major in manufacturing easily spoiled construcrion machinery undercarriage parts, such as Track roller, Carrier roller Sprocket, Idler, Track chain, U-bolt & nut, link-bucket, link rod, spring, pin & bushi-ng, shaft, high-strength track shoe.....
China
Automatic Garage Door Roller (NYLON ROLLER)
Dec 24, 2009
Size: 46mm×114mm
Weight: 0.138kg
Remark: Material: PA66(Nylon), Stainless Steel
Bulged shaft, 11 Steel Balls
Suitable for 2" track.
This Nylon Roller is applicable to use on the Automatic garage.....
China
Hermes Octopus Textile
Dec 24, 2009
Description
expand colors, 4, 6, or 8 color press, interchangeable frames support
Feature
a machine-tooled and polished 7.62 cm(3") center shaft, heavy-duty tapered roller bearings, extra-large knobs, micro-registration with dual off-contact.....
China
Spherical Roller Bearings
Dec 24, 2009
1.The roller path of outer ring is part of the spherical surface, bearing has the inner self-aligning performance, so that it can adapt to the relative deflection between shaft and pillow block bore.
2. It can undertake radial heavy load and.....
China
Howo Spare Parts( Camshaft Mid-gear Shaft )
Dec 23, 2009
Createk's main products include:
1) Full line original spare parts for the Chinese trucks with the brands of Howo, Hania (CNHTC), Fonton, Shaanxi, Dongfeng, Faw, etc.
2) Engineering mechanical fittings such as track rollers, track links, track.....
China
Elevator Door Roller(YK017)
Dec 22, 2009
Email:michelle at weco.cc.
Size:85*17mm
Shafting Bearing:6203
Description:It is hard, steady and durable
Contact me if you want to know more information.
Email:michelle at weco.cc.
NINGBO WECO ELECTRON-OPTICAL CO., LTD
China
300X300X12.5 Square And Rectangular Pipe Welding Machine
Dec 21, 2009
Directly Molding Side Welded Pipe Unit is used to produce closing section steel. It adopts modular mold and directly molding side craftwork, which has the characteristics of no tearing down the main shaft, no tearing down stander, changing roller.....
China
Roller Screw Jack
Dec 21, 2009
Roller Screw Jack Description:
1.Model: RNK-0.5T, 1T, 2T, 3T, 5T, 10T, 15T, 20T
2.Configuration: worm shaft, worm gear, ball bearing, oil seal, housing and ball screw
3.Static loading: 0.5T ~20T.
4.Dynamic loading: 0.033T ~ 2.8T.
5.Input.....
China
One Way Clutch
Dec 19, 2009
One way clutch bearings are designed to transmit torque between the shaft and housing in one direction and allow free overrun in the opposite direction. These designs utilize the same small radial section as drawn cup needle roller bearings. The.....
China
Wood Chipper
Dec 18, 2009
Tractor Mounted Wood chipper, complete automatic hydraulic feeding roller, 3 Bladed, 8"/ 6" Diameter Capacity, fully rotating discharge chute, Powered by 18 hp-45hp tractor. If need, clutched PTO drive shaft is also available. Please contact me for.....
China
Supply The Undercarriage Part
Dec 18, 2009
Track Rollers Lifetime lubricated excavator and bulldozer Bottom Rollers. Hardened rail surface and internal bore. For extra high radial loads. Carrier Rollers Lifetime lubricated shaft type bulldozer Top Rollers and pedestal type with brackets......
China
Raymond Mill
Dec 17, 2009
Working process:
In the main frame, a 100-1500 kg powered pressure spring is fixed to the roller suspender. After the grinder is put into effect, the roller rotates around the main shaft, and rolls closely against the ring pressed by the high.....
China
SLITTING MACHINE (DW-8413)
In case of Jumbo Roll, the diameter is more than ￠1, 000mm and the weight is more than 1, 000kgs. User put material into unwinding shaft, and rolls up the material at a rewinding shaft. User set up knife parts as cutting sizes. The cutting part is ...
Korea (South)
Vertical Shaft Impact Crusher
Vertical Shaft Impact Crusher is also called Sand Making Machine, it’s the specialized equipment in building sand production, can crush all kinds of rock, sand and gravel into the construction sand of particle size, particle size uniform, high ...
China
Lock Former
Machine for Manufacture HVAC Ductwork lock former is light and easy to transport. It can meet different demands, works easily and noiselessly
China
MSB Series Coarse Powder Mill
MSB Coarse Powder Mill series is a kind of new high-tech milling machine to meet the requirements of sand processing customers. Based on our experts’ several years’ research experience in the milling industry and considering recommendations and ...
China
Clothes Hanger Making Machine, Wire Hanger Making Machine, Wire Hanger Bending Machine, Pants Hanger Fo
This machine is suitable for forming clothes hangers automatically. I Main features: Gears are made by 40Cr, adjusted and quenched, HRC 52-55, shafts are made by 45# steel, adjusted Feeding & straightening and forming rollers are made ...
China
Yitong Industry (Ningbo) Co., Ltd.
[Manufacturer, Exporter]
Yitong Industry (Ningbo) Co., Ltd--We are an ISO9001-2000 certificated company that are specialized in designing and manufacturing linear motion bearings, track rollers, shafts, linear guides, bushings and components etc.for more than 15 years.
China
DEX Metal & Machinery Manufacturing Corp.
[Manufacturer]
DEX Metal & Machinery Manufacturing Corp. Is a leading Manufacturer of steel drum closures(2" and 3/ 4" drum plugs and franges), working rollers/ shafts, roller bearings, cutters, steel tiles, clad tiles, copper turbine and etc.
China
Henan Zhongyuan Roll Shaft CO. LTD.
[Manufacturer, Exporter]
Henan Zhongyuan Roller Shaft co., Ltd. founded in 1993, which manufactures forged steel cold work roll, straitening roll, flatting roll, pipe mould and other metallurgical spare parts.
China
Hanghzou Dongshi Auto Parts Manufacturing Co., Ltd
[Manufacturer, Exporter]
Our company is specialized in manufacturing universal joints, drive shafts and needle roller bearings.We have more than ten years experience in this field.If you have interests in our products, pls feel free to contact us, we'll be glad to give you details.
China
Ningbo Yitong Industrial Co., Ltd.
[Manufacturer, Exporter]
We wish to inform you that we specializes in producing the special ball bearing, track roller, pulley, shaft and bushing etc. The manufacturing sizes of bearing are from bore 4mm to diameter 100mm
China
 |
 |
Home -
For Buyers -
For Sellers -
My Trade Office -
Biz Support -
Trade Mall -
YES TRUST -
PR News -
Help
Site Map - About Us - Advertisement - Partnership - Contact Us - Premium Suppliers - Hot Shakers
Hot Keywords : A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Terms of Use - Privacy Policy - Anti-Spam Policy - Safe Trading Tips
Ranked as the most popular site in B2B Marketplace by
and 
©Since 1996 EC Plaza Network, Inc. All Rights Reserved. EC Plaza Network : KOREA, CHINA, JAPAN
Site Map - About Us - Advertisement - Partnership - Contact Us - Premium Suppliers - Hot Shakers
Hot Keywords : A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Terms of Use - Privacy Policy - Anti-Spam Policy - Safe Trading Tips
Ranked as the most popular site in B2B Marketplace by
and
©Since 1996 EC Plaza Network, Inc. All Rights Reserved. EC Plaza Network : KOREA, CHINA, JAPAN