Main Machine Function
1. Touch-screen and electric control dual system
2. Using high quality materials and fittings. All transimission shafts and rollers
are chrome plated to enhance strength
3. All transimission gears are made of high quality of alloy steel which is gringing
under high temperature, Rockwell Hardness>47o
4. Choosing SIEMENS 's touch-screen and PLC dual system, high quality and low mistake
5. Using CAPS-LOCK union link and make accurate overprint long lasting
6. Spraying circulation is adopted to lubricate the gears, reducing noise and
prolonging the service life.
7. Units with pneumatic lock, electric divides and shuts and automatic blake
system, insure printing position will not misplace
8. Audible alarm while unit moving and setting scram switch to ensure operation
9. The fuselage wall plate uses the vibration-proof performance fine cast iron material, the guarantee transmission is steady, the gear meshing is accurate.
1. Motor control to side-jogger, kicker and back-stopper, fast and convenient
2. Aluminum alloy kicker is durable
3. Kicker adjusted by negative air-pressure to ensure good feed. Pressure is
adjustable via pneumatic control.
4. Front stopper is scale hand wind control making feeding orderly and accurately
5. Feeding upper roller is rubber coated and lower roller is chrome plated.
The pneumatic cylinder reduces damage to the substrate and increase feed accuracy.
6. Continue or skip feed with feeder counter, produce relatively large carton
7. Auto-counting production units
8. On vacuums the air blower to provide the amount of wind adjustment board, may attract the different specification cardboard surface dust.
1. High quality chromed Anilox roll, durable and good printing effect.
2. Motor control, fast and convenient
3. Rubber coated roll specially ground to achieve better ink transferring
4. Air-operated automatic elevator device work in feeding system (the roller
descend when feeding and it rise when feeding stop )
5. Using hanging style controlled by foot switch, convenience and fast
6. Phase adjustment, harmonic device and transducer control the dymatic and
static 360o electric adjustment
7. Device to lock gears position when unit are opened. Stereo position will
be restored when units are closed.
8. Manual control of printing cylinder transverse register (20mm)
1. The thickness of slotter knife which hardened and sharp alloy steel is 7mm
2. Computer motor control slotter knife position 360 in dual speeds both at
printing and set-up mode.
3. Motor control of slotter knife transverse register fast and accuracy.
4. A hole-punching device can be equipped as an option.
5. Slot department Canada supposes the precompression to roll around, sharpens the cardboard resistant to compression ability.
6. The line ball cuts the angle turn place addition compressing wheel disk, guarantee the paper box sticks the mouth place to compress.
1. Connection arm operated manually or automatically.
2. The transfer belt at the connection arm can be adjusted tension individually
and can choose the number of the arm at will
3. Strong chains drive the bed up and down.
4. Height up to 1600mm
5. The transport bed motor with brake control to keep stable position and anti-slipping.
6. A pneumatic controlled-plate will be pop-up to hold the coming substrate,
when a pre-setting height reaches.
7. The hopper width is manual adjusted.
8. Anti-slipping belt used in the transport bed.
Die Cutter Unit
1. Anvil cover roller and template roller all use high quality materials, the surface are grinded and plate hard chromium.
2. Balance adjustment, increase balance adjustment and revolution stability.
3. Template roller and anvil cover roller with no die-cutter can auto run away through electric gear to relieve the machine racing load and extend the life of anvil cover roller and cutter die.
4. Coordinates delivers the paper system air operated like power elevation installment(to deliver when the paper the template roller to rise first, stops delivers when the paper the template roller afterwards dropping, guarantees each cardboard correct die cutting.
5. Machine drive excellent strength rubber roller horizontal move +- 30 mm and every cutter with different areas (no circulation), the same that which even can extend the life of anvil cover roller.
6. Unique speed difference compensate device, whatever the diameter of cushion change, the device can make the rubber roller along with template roller glide, accordingly let the surface of cushion and knife template at same speed and insure every batch carton in one size.
7. The machine with import anvil cover roller and equipment with cushion amender, can amend 2 to 3 times, and every time 1 to 1.5mm, extend the life.
8. Phase adjustment, overtone fast difference installment, electronic digital 360 degrees adjustment, ( run, stop, install and uninstall)
Product Specification / Models
Model 2500 2800
Max. Machine Speed (m/min) 120 120
Max. Feeding size(mm) 2470*1400 2770*1400
Max. Printing area(mm) 2450*1350 2750*1350
Min. Feeding size(mm) 650*380 700*380
Skip feeding size(mm) 2470*1600 2770*1600
Standard printing plate depth(mm) 7.2 7.2
Min. slot interval(mm) positive cut
Reverse cut 140x140x140x140 140x140x140x140
Feeding Depth (mm) 2.5-12 2.5-12
for corrugated cartons making
- Payment : T/T or L/C
- Delivery : 60 days
- Origin : China
- Minimum Order : 1 set
- Packaging : pallet
- Inspection : CE
- Samples : Charge